Showing posts with label Router. Show all posts
Showing posts with label Router. Show all posts

Tuesday, 23 November 2010

A Quick Reference to a Wireless Router Setup

Where wireless routers and speeds are concerned, price is not always the best controlling factor. There's a wide variety of wireless routers available in the market and one is not always as good as the other. Basic, low-range types gives you speeds of only about 56 mbps. Pick one with ultra-range capabilities or a dual-band router for best performance and fastest speeds.

Setting up your wireless routers is not as difficult as it seems. When you have a wireless router at hand, you only have to substitute your DSL or cable connection with it. For techie people who would like to learn, here's a quick guide to doing it yourself.

First, remove cable or DS modem from your power supply and also the ethernet cable from the computer. Leave the phone cord on the modem.

Connect the end of the ethernet cable you removed from your computer to the internet port at the back of your router. This port is normally marked clearly. Plug your Modem again, the energy source.

Plug the Ethernet cable to the Ethernet port of the router's network card in your computer. The other end goes into one of the Ethernet network ports on the router itself.

Connect the lights on the router to a power outlet and check the display. Five lights should be of electric light, the Internet easily, safety light, light and light for wireless connections to an Ethernet network.

Allindicator lights should be stable. Otherwise, you'll need to check if you had plugged cables securely or if the router is working properly.

Install the software that came with your wireless router. Run it as instructed and test your system. Products made by different manufacturers, although intended for the same purposes, would invariably be slightly different from one another. Some routers could be a bit more complicated to setup or install. If you followed the above steps and it didn't work like it should, refer to your router's user manual for guidance. This is usually included in the kit that you purchased. If it's not, log on to your manufacturer's website for questions.

When you have accurately installed your router into your system, configure the device. Key-in your internet access pass (username and password) into the router's setup screen. Also, for security reasons, change your router's username and password immediately to prevent unauthorized access into your wireless connection.

Although sharing internet connection and file sharing between network computers may be done via alternative methods, having a router simplifies these tasks immensely. It's what makes routers such popular alternatives.

Although routers do not generally support dial-up modems, there are a few units with built-in serial ports that work with serial cables to accommodate dial-up connectivity.

Get better access to your home network and get the most out of your internet connection. Hook everything up to a network with a wireless router. It saves you time, effort, and money. Plus, it makes your computers better-able to interact with your mobile phones and other devices.

Tuesday, 16 November 2010

How to Fix a Wireless Router That Keeps Dropping the Connection

On black Friday this past year I decided to pick up a new wireless router. The wireless N support was obviously a nice selling point, but the key feature for me was the range booster. I like to work on my laptop in different rooms around the house and some are pretty far from my wireless router. The range booster helps to transmit the signal farther and stronger than a standard router, resulting in a better experience in all rooms of the house or office.

The router I ended up buying was the Cisco/Linksys WRT160N. I've owned Linksys routers for years and have always had a good experience with them.

A Linksys router for wireless internet

After a simple and quick install I was up and running wirelessly, or so I thought. After a few minutes my wireless connection started giving me problems. The connection would drop every few minutes and then pick up again a few seconds later. This was annoying and rendered the router completely and utterly useless.

Having your wireless router drop the connection on a regular basis is a fairly common problem. You may encounter this problem after many months or even years of good use out of the router. Of course there is always the possibility that something is faulty with the router itself. There is, however, one important step that may fix the problem and get your router back on track. It worked perfectly in the above-mentioned scenario and has worked for me numerous times in the past.

The first thing you need to do is to check whether you have the latest version of the router firmware! If you don't, then you should upgrade immediately!

In simple terms, the word firmware denotes the program or software that controls the hardware. The best place to look for the latest firmware is the manufacturer's site. In this case I went directly to the Linksys website and searched for it. To install the latest firmware you'll have to log in to your router's admin control panel (typically done through a web browser) and then to go to the section that allows you to perform the upgrade. After the firmware has been upgraded the router is rebooted and then things are hopefully in good shape. I'm writing this article after hours of uninterrupted wireless internet connectivity.

There is one more important steps that you must take to ensure the most reliable Internet connection: Go to your computer manufacturer's site and make sure you have the latest drivers for your wireless card. Even after upgrading the firmware, you need to ensure that your device is not partially responsible for the problems. So go ahead and download and install the latest drivers for your computer's wireless card. This step is just as important as the firmware upgrade so don't be lazy and ignore it.

Happy surfing...

Monday, 18 October 2010

How to build a wireless router, the connection Keeps Dropping

The Black Friday last year I decided to take a new wireless router. The wireless-N support is obviously a selling point pleasant, but the main feature for me was to select boosters. I like the room on my laptop in different parts of home and some are very far from my wireless router. recall the stronger the signal range will help to continue and as a router by default, leading to a better experience in all areas ofHome or office.

The router I ended up buying was the / Cisco Linksys WRT160N. I had a Linksys router for years and property has always had a good experience with them.

A Linksys router for wireless Internet

After a quick and easy installation, I was running wireless, or so I thought. After a few minutes my wireless connection started my problems. The connection would be around a few minutes covered and then return after a few seconds. E 'was annoying andrendered the router useless.

Once the wireless router in at regular intervals, is a common problem. You may experience this problem after many months or even years of good use of the router. Of course there is always the possibility that something is wrong with the router. However, there is an important step that can solve the problem and the router back on track. It worked perfectly in the scenario above andworked for me countless times before.

The first thing to do is check if you have the latest firmware of the router! If not, then you should upgrade immediately!

In simple terms, the word program firmware or software that controls hardware. The best place to find the latest firmware the manufacturer's website. In this case, I went directly to the Linksys website and searched for it. To install the latest version of firmware you haveorder (usually done through a web browser) in the control panel and then the router admin section where you can upgrade to go. After updating the firmware, the router will restart and then hopefully things are in good shape. I write this, after hours of uninterrupted wireless connectivity.

There is a further step, important to take necessary to ensure the most reliable connection to the Internet: Go to the computer manufacturerWeb site and verify that the latest drivers for the wireless card. Even after updating the firmware, you must make sure your product is not responsible for the problems. So go ahead and download and install the latest drivers for your wireless adapter in your computer. This step is important as the firmware update so do not be lazy and ignore it.

Happy surfing ...

Thursday, 30 September 2010

Setting up a wireless router at home tips

Wireless home networking is a common method of data transfer. Connect the computer to the wireless gateway to the Internet is the method of choice for many modern systems, the need to access the Web Wide World. You can use the simple steps in creating a wireless Internet router at home.

Run the high-speed modem to the computer system. This is the type of modem high-speed DSL and cable modems capable of broadband datatransfer.

Then he has the power to disconnect the modem and remove all the network cables that are connected to the device.

For the next step, you can use the proper network cable from the LAN port on the back of wireless router to the Internet to the network port on the back of high-speed modem.

You also need to connect a network cable to the different legal computer's LAN connection port on the back of the computer in an open network port on the back of eachthe wireless router.

Then again, a power cord for the modem and the wireless router. E 'for you to decide that the big computer's connection to the router and modem has an important. They should realize that the light turns green indicators on the router, which is indicative of a positive connection.

For the final step is to check the connections and internet connections with the router and theSoftware on your computer.

Friday, 23 July 2010

Linksys WRV54G Wireless VPN Router light on

The Linksys Wireless-G VPN Broadband Router WRV54G will be lovers of all small businesses that can not only maintain their spirit of aesthetic office. Most routers, VPN Wireless Router also look dull and a bit 'square, but not this Linksys, actually, this router provides wireless VPN terribly sophisticated mostly because of his-and angle-type silver. Still trying to help small companies to work quickly and well, Linksys Wireless A offers through this VPN Routerallows a very impressive support for up to 50 VPN tunnels and so many employers, the benefits of Internet access on the move good for you around the home. Furthermore, in order to save your work, it is also a firewall extended.

However, surprisingly, when it comes to security goes Wireless VPN router that is quite short a few points, especially since the WPA support is completely missing, while routers have many others. Another is its lowmaximum throughput that even from afar. This Linksys router has a high price and also for its shortcomings, will be a niche product and its target, unfortunately, is not associated with an Advanced Search Wi-Fi security, but the company, seeking a combined VPN and wireless router.

Linskys This router has the exact location if you can adapter (also on the Wireless Media B from the same manufacturer). You can put almostworldwide because it can also be its end soon, because it has four feet, which can be inserted at any time. In addition, the rubber feet are nice to offer some protection against scratches to the legs of all kinds. If you are not ready to take place, but how it is? The Linksys Wireless VPN Router comes with brackets and the wall can be used to hang around. With every choice to select the antenna can be made from bothPlaces from 90 degrees to 360 degrees. Also, if this were not enough, if you're not always the right signal in one of the positions you can easily unscrew the antenna from her and add an additional antenna.

What is the User's Guide - if he had not made more cryptic would like some Egyptians. Perhaps the technology is not all strength, which means that not all are so familiar with the matter, but again, they could have made a userLeaders, and not a professional manual. The Quick Guide, which is by no means clear how the fairy tales, as they should now be useful for the commercial and the images and do not pull someone in complete confusion. The absence of identification of photos of the guide did everything pretty useless. For example, the router supports operating systems other than Windows just plain, and the manual does not show any explanation to configure it using Mac OS X, for example. To learn more abouthttp://www.howtosetupwirelessnetwork.com

Finally, the router is not present in many places, but only depends on what you want and how much you're willing to spend on a wireless VPN router.